- This topic is empty.
Canon 20D no response
-
the problem i have with it is that when i put in a fully charged battery their is no life in the camera, it was working fine a few days ago , any ideas what the problem could be.
Had a check around the sites for you and the commont faults that would make the 20D not power up would be
Battery Pack maybe a little loose.
If the CF door is slightly “Off” that could do it.
If the camera had reset itself, that could cause an ERR99 message.
Ca happen if a faulty CF card is used (try another one) Make sure its off when switching.
Contact pins in the CF compartment are bent and sends a message to camera.Hope thats of some help.?
It happened me once.
I took out the battery, removed the lens, removed the memory cards, left it for 10 min and then put everything back together. It then worked fine, and I have had no further issues.
a non-compatible lens (such as one purchased for film bodies) can make the camera lock up.
Try cleaning the contact points between the lens and the Camera that might be one possibility,there are 3 contact points when you take off the lens and look directly at the camera front.Re-connect lens and start up again.
tried all the options but none have worked , i’ll leave it in to get it repaired
You must be logged in to reply to this topic.
