Search
Generic filters
Exact matches only

Cokin vrs Lee

  • This topic is empty.

Cokin vrs Lee

  • redfox
    Member

    A quick question to the landscape photographers out there, I’m planning to buy a set of nd grads and want to get the best, cokin are great value but Lee seem to be used by all the top UK based photographers, I know that a lot of them would get them free to promote them so is there any advice out there.

    Deebo
    Participant

    Hi Redfox.
    I am having the same dilema.
    I want to try the ten stop ND filters but torn between paying about 40quid for the B&W brand or paying a 100 quick for Lee big stopper.
    Any advice from any users who know these filters would also be appreciated
    Cheers, Dee

    brownie
    Participant

    Hi, I started out with Cokins myself but changed to Lee several years ago…Lee filters are the best and the main reason
    was no colour cast whatsoever…Cokins ND Graduated filters always gave a slight colour cast, easily fixed with software
    but more time spent on the computer. Lee filters are top class and if you are going to invest, i think you should get the
    best because you will probably want them in a few years time anyhow. They are costly but definately worth it. Not sure about
    the Lee 10 stopper, have’nt heard anything bad though, you would of course have to buy the filter holder as well as they are not
    screw-in.

    Noel.

    Deebo
    Participant

    Cheers Noel
    Yes, thats what I thought.
    I looked at the lee’s and all good reviews and I know they are the best on the market. but 100 quid plus the holder does drive the price up
    Whereas 30quid screw in might suffice for a year or two.
    Thanks, Dee

    LWheeler
    Participant

    Hi,

    I started off with Cokin filters but found that the Neutral Density filters gave a red colour cast to my photographs. Although this can be removed in post production, I got a bit fed up of spending time doing this, and ended up purchasing Lee filters.

    In my opinion the difference is like night and day. I think that the Lee filters are significantly better than Cokin and would highly recommend them.

    I also have the Lee Big Stopper (10 stop Neutral Density) and have found it to be good quality as well (no colour casts). I initially purchased a cheaper Hi-tech brand but found that it leaked light quite badly, so I ended up getting the Lee version. I believe that the B&W 10 stop filters are very good, however one of the benefits of the Lee filter is that it is easy to take the filter on and off the holder, should you want to recompose your photographs. It also makes it easy to combine the use of this filter with a Neutral Density Grad (should you want to)….

    I appreciate that the price of the Lee filters can be hard to justify, but I certainly wish that I would have waited and saved up for the Lee filters, instead of purchasing the Cokin brand and then ending up having to buy what I knew I should have.

    Lawrence

    Jonnyp16v
    Participant

    I heard that you can use lee filters in a cokin holder, is that true???

    LWheeler
    Participant

    You may be able to (have not tried it), but I think that you would need to go for a Cokin Z-Pro holder…..

    Lawrence

    ossie13
    Participant

    LWheeler wrote:

    Hi,

    I started off with Cokin filters but found that the Neutral Density filters gave a red colour cast to my photographs. Although this can be removed in post production, I got a bit fed up of spending time doing this, and ended up purchasing Lee filters.

    In my opinion the difference is like night and day. I think that the Lee filters are significantly better than Cokin and would highly recommend them.

    I also have the Lee Big Stopper (10 stop Neutral Density) and have found it to be good quality as well (no colour casts). I initially purchased a cheaper Hi-tech brand but found that it leaked light quite badly, so I ended up getting the Lee version. I believe that the B&W 10 stop filters are very good, however one of the benefits of the Lee filter is that it is easy to take the filter on and off the holder, should you want to recompose your photographs. It also makes it easy to combine the use of this filter with a Neutral Density Grad (should you want to)….

    I appreciate that the price of the Lee filters can be hard to justify, but I certainly wish that I would have waited and saved up for the Lee filters, instead of purchasing the Cokin brand and then ending up having to buy what I knew I should have.Lawrence

    Totally agree with Lawrence went down the same route bought the Cokin not happy got the Lee!!

    If you are in a position to get the Lee I would recommend you do so!!

    Cheers Steve

    pelagic
    Member

    Filters are like tripods, everyone starts out cheap, buys twice and spends a lot more in the long run.

    Delay gratification and save up the pennies.

    Bricker
    Participant

    Another here who started out with a set of Cokin. I found them okay, but became irritated with the colour cast after a while.

    I looked at Lee, but tbh thought they are really dear and for the amount of use they would get I felt that it would be difficult to justify the outlay. So i went another route and got myself a set of Format ND grads and thier 10 stopper (which I havent used yet!). They were significantly cheaper than the Lee, and I made sure to get the width that fits the cokin holder (85mm springs to mind, but Im in work so cant check) to keep the cost down.

    So far, I am a happy camper and havent noticed a cast since filing the Cokin.

    Just thought Id mention another alternative.

    Good luck!

    pelagic
    Member

    Des,

    When you get home please post the details of your kit.

    And why aren’t you working? :) :twisted: :)

    jaybee
    Participant

    I’d personally go with hoya… they are teh largest manufacturer of optical glass in the world and they coat and multi-coat as a matter of course…

    In fact they manufacturer specific element lenses for mainstream manufacturers….

    for my money they are as good as b&w in the hmc and shmc bracket and my pro1D cpl is better that my b&w…

    DaveMurdoch
    Participant

    I bought a KOOD filter kit over a year ago and there`s no colour cast with them at all…
    The only problem i have with them is that they only do ND2 and ND4 and they never seemed to have any ND4 hard grads in stock :?
    they also scratch easily!!

    I recently bought a Cokin ND8 hard grad but am really dissapointed with the colour cast problem :(

    I was thinking of getting some hard grad KOOD filters,as i only have soft grads..
    Then i found this review on Hi tech filters http://forums.dpreview.com/forums/read.asp?forum=1007&message=20613354″ onclick=”window.open(this.href);return false;

    It seems they have no colour cast either!!
    Anyone use these???

    Bricker
    Participant

    Ted: I was on a break!

    Yes it is 85mm that fits my cokin holder.

    The Hi-tech filters are the same ones I was talking about! They are made by Format in the UK…. google Format Filters and you can buy direct from the site.

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.