D200 – 10 pin remote terminal

[Mark]

July 15, 2006 at 12:40 pm

I find that this is a very tight fit. It that normal ?
Can never get the remote all the way into the port

thanks

[GilesKS]

July 15, 2006 at 9:16 pm

Min is also very tight, I think that’s normal. I’m using an Aldit remote cord with it, which works pretty well.

[Mark]

July 15, 2006 at 10:51 pm

Good.

I’m using a 3rd party one also, which I got from ebay. Works a treat and all for less than ?10 :)

Mark

[jb7]

September 16, 2006 at 11:40 am

I assume you’re using an addit release or similar-
if you cut 1mm off the end of the plastic tube (carefully) you’ll get a much better fit-

[Mark]

September 19, 2006 at 8:15 am

cool will try that