- This topic is empty.
Darkroom Process Timer by RH Designs SOLD
-
Mint condition. €140
ProcessMaster Features
-Fully programmable sequence timer has eight programmes, each of which can have up to nine time steps.
-Each time step can range from 5 seconds to 2 hours.
-Built-in temperature probe optionally monitors chemical temperatures during processing and automatically adjusts process time to compensate for changes.
(black and white processes only)
-Large easily-read red LED display with adjustable brightness level.
-Footswitch included as standard for hands-free operation.
-Optional percentage display allows easy time adjustments, e.g “plus 10 percent” – useful for Zone System adjustments and compensation for developer exhaustion.
-Factorial Print Development mode for increased consistency as developer exhausts.
-Programmed times can be modified “on the fly” for temporary adjustments.
-Audible count-down during the last 10 seconds of each step (optional).
-Any step can be set to continue counting up after the end of the programmed time has expired, with elapsed time displayed in seconds or as a percentage of the programmed time.
-Pause and resume feature, plus your choice of pause-between-steps or continuous timing.
-Power-saving feature switches to stand-by after 30 seconds idle time – this feature can be disabled if desired.
-Powered by a single PP3/MN1602 type battery (included) or from an optional plug-in mains power supply – see the Sundries page for details.
-Splash-proof case and tactile touch sensitive controls for reliability.Any questions on what this timer can do please let me know.
Thanks
Fintan
You must be logged in to reply to this topic.
