hi all , just looking for a bit of advice. i bought the hahnel combi thingy about a year ago and to be quite honest very rarely use it….but, that said it always worked fine when i did . yesterday i was messing around with it and noticed that it is working as a wireless remote(receiver on hotshoe , data wire connected , pressing button on transmitter) but wont work as a wireless flash trigger (transmitter on hotshoe , flash connected to receiver ) the signal is getting through but the flash is only firing the test flash ..not the full flash :( . i realise its not TTL , i have the flash set to manual etc. i also know the flash is not the problem because i put it directly on the camera and it works fine…so its something between the receiver and the flash i presume ….any ideas ?